Enoxaparin Sodium 40mg/0.4ml Injection
Reviewed educational reference: what Enoxaparin Sodium is used for, how it works, its side effects and safety advice, plus the Indian brands that contain it.
- Molecule
- Enoxaparin Sodium
- Strength
- 40mg/0.4ml
- Dosage form
- Injection
- Drug class
- Low Molecular Weight Heparin (LMWH)
Related products
No reviewed products are currently published for this generic.
Enoxaparin Sodium 40mg/0.4ml Injection is a low molecular weight heparin (LMWH) used to prevent and treat blood clots. Unlike standard heparin, Enoxaparin Sodium has a more predictable response in the body, which means patients usually do not need frequent blood tests to monitor the dose. It is widely used in hospitals and for home care to manage deep vein thrombosis and pulmonary embolism. By inhibiting specific clotting factors, Enoxaparin Sodium 40mg/0.4ml Injection prevents the growth of existing clots and stops new ones from forming, reducing the risk of stroke or heart attack in critical patients.
At a glance
Enoxaparin Sodium 40mg/0.4ml Injection is an injectable anticoagulant containing Enoxaparin Sodium.
It prevents the formation of blood clots by inhibiting clotting factors Xa and IIa.
It is used for the treatment and prevention of deep vein thrombosis and pulmonary embolism.
Uses of Enoxaparin Sodium
- Prevention of deep vein thrombosis (DVT) after hip or knee replacement surgery.
- Treatment of deep vein thrombosis (DVT) to prevent the clot from moving.
- Treatment of pulmonary embolism (PE) where a clot has reached the lungs.
- Management of acute coronary syndrome, including unstable angina and non-ST elevation myocardial infarction.
- Prophylaxis of venous thromboembolism in medical patients with restricted mobility.
- Bridging therapy for patients transitioning to oral anticoagulants like warfarin.
Benefits of Enoxaparin Sodium
Predictable Anticoagulation
One of the primary advantages of Enoxaparin Sodium 40mg/0.4ml Injection is its predictable pharmacokinetic profile. This eliminates the need for routine monitoring of the activated partial thromboplastin time (aPTT), which is mandatory for unfractionated heparin. This makes the treatment safer and more convenient for both the clinician and the patient.
Lower Risk of Complications
Compared to standard heparin, Enoxaparin Sodium is associated with a lower incidence of heparin induced thrombocytopenia (HIT), a dangerous drop in platelet count. It also has a longer half life, allowing for once or twice daily dosing instead of continuous intravenous infusions, which improves the quality of life for patients receiving outpatient care.
Side effects of Enoxaparin Sodium
The most common side effect of Enoxaparin Sodium 40mg/0.4ml Injection is bleeding. This can range from mild bruising at the injection site to severe internal bleeding. Some patients may experience anemia due to occult blood loss. A more serious but rare reaction is heparin induced thrombocytopenia, where the immune system attacks platelets, potentially causing new clots. Other side effects include local reactions like redness, itching, or pain where the needle entered the skin. In rare cases, severe allergic reactions or systemic hypotension may occur during administration. Patients should be monitored for signs of gastrointestinal bleeding, such as black or tarry stools.
| Side effect | How common | How severe | What to do |
|---|---|---|---|
| Injection site hematoma | Very common | Mild | Avoid rubbing the site after injection. |
| Major hemorrhage | Uncommon | Severe | Avoid concurrent use of NSAIDs. |
| Heparin Induced Thrombocytopenia | Rare | Life-threatening | Regular platelet count monitoring. |
How to manage side effects
Injection site hematoma
- Apply a cold compress
- Monitor for size increase
- Rotate injection sites
Major hemorrhage
- Stop medication immediately
- Administer protamine sulfate
- Provide blood transfusion
Heparin Induced Thrombocytopenia
- Discontinue all heparin products
- Start non heparin anticoagulant
- Administer IV immunoglobulin if severe
How to use Enoxaparin Sodium
- Clean the injection site on the abdomen with an alcohol swab, avoiding the belly button.
- Gently pinch a fold of skin and insert the needle at a 90 degree angle.
- Push the plunger slowly and steadily until the full dose is delivered.
- Do not expel the air bubble from the pre filled syringe before injection, as this ensures the full dose is administered.
- Do not rub the injection site after the needle is removed, as this can increase bruising.
- Rotate the injection site between the left and right sides of the abdomen for each dose.
Special population advice
Kidney impairment
- Reduce dose to 20mg once daily if CrCl is less than 30 ml/min.
- Monitor anti Xa levels closely in patients with severe renal failure.
Liver impairment
- Use with caution due to increased bleeding risk.
- No specific dose adjustment is mandated but close monitoring is required.
Children
- Dose is typically 1mg per kg every 12 hours for treatment.
- Strict weight based dosing is mandatory to avoid overdose.
Elderly
- Monitor renal function regularly as GFR declines with age.
- Be alert for signs of occult bleeding in frail patients.
How Enoxaparin Sodium works
Enoxaparin Sodium works by binding to antithrombin III, which is a natural protein in the blood that stops clotting. This binding increases the activity of antithrombin III, allowing it to neutralize Factor Xa and Factor IIa (thrombin). While it affects both, Enoxaparin Sodium 40mg/0.4ml Injection is much more potent at inhibiting Factor Xa. By blocking these factors, the coagulation cascade is interrupted, and the formation of fibrin clots is prevented.
What if you miss or exceed a dose?
If you miss a dose
If you miss a dose of Enoxaparin Sodium 40mg/0.4ml Injection, contact your doctor immediately. Do not take a double dose to make up for the missed one, as this significantly increases the risk of severe bleeding. Your doctor will tell you whether to take the missed dose now or wait until the next scheduled time.
In case of overdose
An overdose of Enoxaparin Sodium leads to excessive anticoagulation and a high risk of spontaneous bleeding. Symptoms include bleeding gums, nosebleeds, or blood in the urine. While there is no complete reversal agent, protamine sulfate can be used to partially neutralize the effect of Enoxaparin Sodium 40mg/0.4ml Injection, although it is less effective for LMWH than for unfractionated heparin.
Provides partial reversal of the anticoagulant effect of LMWH.
- Initial Assessment
- Check for active bleeding sites and perform a complete blood count.
- Reversal Therapy
- Administer protamine sulfate slowly via intravenous infusion.
- Supportive Care
- Provide blood transfusions or fresh frozen plasma if hemorrhage is severe.
- Monitoring
- Repeat anti Xa levels to ensure the anticoagulant effect is reduced.
Safety and precautions
When to avoid Enoxaparin Sodium
- Active major bleeding
Using the drug during active bleeding can lead to life threatening hemorrhage.
- Heparin Induced Thrombocytopenia (HIT)
History of HIT makes the drug unsafe as it can trigger further clotting.
- Severe Renal Impairment
Requires dose reduction as the drug is cleared by the kidneys.
- Thrombocytopenia
Low platelet counts increase the risk of bleeding complications.
- Recent Brain Surgery
High risk of intracranial hemorrhage.
- Concurrent NSAID use
Increases the risk of gastrointestinal bleeding.
Safety at a glance
Avoid excessive alcohol as it can increase the risk of stomach bleeding.
It is generally safe and preferred over warfarin as it does not cross the placenta.
It does not enter breast milk in significant amounts and is considered safe.
This medication does not typically impair driving or operating machinery.
Dose reduction is required in severe renal impairment to avoid accumulation.
Use with care as liver dysfunction can increase the risk of bleeding.
Do not use if you have a known allergy to heparin or pork products.
Dosing must be strictly weight based and monitored by a specialist.
Higher risk of bleeding and renal decline, so dose adjustments may be needed.
Interactions
With other medicines
Aspirin
ModerateChanges the medicine’s effect
What can happen: Increased risk of systemic bleeding.
What to do: Use only if clinically indicated and monitor for bleeding.
Warfarin
MajorChanges the medicine’s effect
What can happen: Synergistic anticoagulation leading to high hemorrhage risk.
What to do: Overlap doses carefully and monitor INR closely.
Clopidogrel
ModerateChanges the medicine’s effect
What can happen: Enhanced inhibition of platelet aggregation.
What to do: Monitor for signs of occult bleeding.
With food and drink
- Garlic and Ginger supplementsMinor
High doses of these may slightly increase the risk of bleeding.
- Omega 3 Fish OilMinor
May have mild antiplatelet effects that add to the drug action.
If you have another condition
- Chronic Kidney Disease
Reduced clearance leads to drug accumulation and higher bleeding risk.
- Peptic Ulcer Disease
Increases the likelihood of severe upper gastrointestinal bleeding.
- Hypertension
Uncontrolled high blood pressure increases the risk of hemorrhagic stroke.
Effect on laboratory tests
- Platelet Count
Decrease
Monitoring is needed to detect Heparin Induced Thrombocytopenia.
- aPTT
Slight Increase
Not used for monitoring LMWH but may be slightly prolonged.
- Anti Xa Assay
Increase
The gold standard test for monitoring Enoxaparin Sodium levels.
Quick tips
- Use a soft toothbrush and an electric razor to avoid cuts and bleeding.
- Report any unusual bruising or blood in your urine or stools to your doctor immediately.
- Avoid taking aspirin or other pain killers like ibuprofen unless your doctor specifically tells you to.
- Keep a record of your injection sites to ensure you are rotating them properly.
- Inform your dentist or any surgeon that you are taking Enoxaparin Sodium 40mg/0.4ml Injection before any procedure.
Counselling points
- Injection TechniqueImportant
Do not push the air bubble out of the syringe. Inject straight into the skin fold of the belly.
- Bleeding WarningImportant
Seek immediate help if you see blood in your urine, stool, or have a severe headache.
- Medication SafetyGood to know
Avoid taking aspirin or ibuprofen unless your doctor says it is okay.
- Daily CareGood to know
Use a soft toothbrush and an electric razor to prevent cuts.
Monitoring during treatment
Before starting
- Serum creatinine
- Platelet count
- Hemoglobin levels
During treatment
- every 2 days: Platelet count during the first 4 days of treatment
- weekly: Platelet count for long term prophylaxis
What is being watched
- Platelet count
- Hemoglobin
- Creatinine clearance
- Anti Xa levels
Pharmacokinetics
- Absorption
- Rapidly and completely absorbed after subcutaneous injection.
- Bioavailability
- Nearly 100 percent after subcutaneous administration.
- Protein binding
- Approximately 60 percent bound to plasma proteins.
- Volume of distribution
- Distributed throughout the extracellular fluid.
- Half-life
- About 4.5 to 7 hours depending on renal function.
- Metabolism
- Primarily metabolized in the liver by desorption and degradation.
- Excretion
- Mainly excreted by the kidneys via glomerular filtration.
- Onset / duration
- Onset is rapid, typically within 3 to 5 hours for peak effect.
Fact box
- Chemical class
- Glycosaminoglycan
- Habit forming
- No
- Therapeutic class
- Anticoagulant
- Action class
- Factor Xa Inhibitor
- Storage
- Store Enoxaparin Sodium 40mg/0.4ml Injection in its original carton to protect it from light. Keep it at room temperature below 25 degrees Celsius. Do not freeze the syringes.
- ATC code
- B01AB06
- Pregnancy category
- B
More information
Why Clinicians Prefer LMWH Over Standard Heparin
For decades, unfractionated heparin was the gold standard for acute anticoagulation. However, Enoxaparin Sodium has largely replaced it in many clinical settings. The primary reason is the predictability of the dose response. Standard heparin binds non specifically to various plasma proteins and cells, making its effect vary wildly between patients. This requires constant monitoring of the aPTT and frequent dose adjustments. In contrast, Enoxaparin Sodium 40mg/0.4ml Injection has a more uniform molecular weight, which leads to a consistent anticoagulant effect. This allows clinicians to prescribe a fixed dose based on weight, removing the need for constant blood tests. Furthermore, the ability to administer Enoxaparin Sodium subcutaneously once or twice a day makes it suitable for outpatient management, reducing the burden on hospital beds and improving patient comfort.
Comparing Enoxaparin with DOACs
Direct Oral Anticoagulants (DOACs) like rivaroxaban and apixaban have become popular because they are oral tablets. However, Enoxaparin Sodium 40mg/0.4ml Injection remains essential in specific scenarios. In the acute phase of a myocardial infarction or pulmonary embolism, the rapid onset of an injectable anticoagulant is often preferred. More importantly, Enoxaparin Sodium is the drug of choice during pregnancy. DOACs are generally avoided in pregnant women because they cross the placenta or lack sufficient safety data. Additionally, in patients with severe renal failure, some DOACs are contraindicated, whereas Enoxaparin Sodium can still be used with careful dose adjustments and monitoring of anti Xa levels. The reversibility, although partial, is also a factor that makes LMWH a safer choice in surgical settings where sudden bleeding might occur.
Lifestyle Adjustments and Safety Precautions
Patients on Enoxaparin Sodium 40mg/0.4ml Injection must adapt their daily routines to minimize bleeding risks. The most critical advice is to avoid activities that could cause trauma. Contact sports or heavy machinery work should be avoided. Simple changes in hygiene are also necessary. Switching to an electric shaver instead of a blade razor and using a soft bristle toothbrush can prevent significant bleeding from minor cuts. Diet does not directly interfere with Enoxaparin Sodium, but patients must be cautious if they are transitioning to warfarin. Warfarin is affected by Vitamin K rich foods like spinach and kale, whereas Enoxaparin Sodium 40mg/0.4ml Injection is not. Patients should be taught that while the injection is convenient, the risk of internal bleeding is always present, and they should be vigilant for signs like dark stools or unexplained bruising on the arms and legs.
What to Expect During Treatment
A typical course of treatment with Enoxaparin Sodium 40mg/0.4ml Injection often begins in the hospital and continues at home. Patients should expect some mild bruising at the injection sites, which is normal. The most critical part of the treatment is the monitoring of platelets. Heparin Induced Thrombocytopenia (HIT) is a paradoxical reaction where the drug causes the body to form more clots instead of fewer. This usually happens within the first five to ten days of therapy. Therefore, regular blood tests are conducted early on. If the patient is being bridged to an oral anticoagulant, they will take both Enoxaparin Sodium 40mg/0.4ml Injection and the oral drug for several days. This is because oral drugs take time to reach full effect. Once the oral drug is therapeutic, the injections are stopped. Patients should be warned that stopping the drug abruptly without a replacement can lead to a recurrence of the clot.
References
- Tripathi KD. Essentials of Medical Pharmacology. 8th ed. Jaypee Brothers Medical Publishers, 2019. p. 666.Accessed
- Electronic Medicines Compendium. Enoxaparin Sodium, Summary of Product Characteristics.View sourceAccessed
- European Medicines Agency. Inhixa Product Information.View sourceAccessed
- FDA. Enoxaparin Sodium Injection Label.View sourceAccessed
- Drugs.com. Enoxaparin Sodium Injection Professional Information.View sourceAccessed
Frequently asked questions about Enoxaparin Sodium
Can I take Enoxaparin Sodium 40mg/0.4ml Injection if I have a history of stomach ulcers?
You must inform your doctor. Active ulcers are a contraindication because the drug increases the risk of severe gastrointestinal bleeding.
Why is there an air bubble in the pre filled syringe?
The air bubble is designed to push the entire dose of the medication into the skin and seal the track, preventing the drug from leaking back out.
Will this medication make me bleed more if I get a cut?
Yes, you will notice that cuts take longer to stop bleeding. Apply firm pressure to any wound for several minutes longer than usual.
Do I need to have my blood tested every week?
Unlike standard heparin, Enoxaparin Sodium usually does not require routine blood clotting tests, though your doctor may check your platelet count.
Can I use a heating pad on the injection site?
Avoid applying heat or rubbing the area, as this can increase the risk of bruising and skin irritation.
Most bought this month
1Crocin Advance 500 TabletGlaxoSmithKline Pharmaceuticals Ltd₹22.25
2Glycomet 500 TabletUSV Pvt Ltd₹18.80
3Mox 500 CapsuleSun Pharmaceutical Industries Ltd₹72.80
4Cetzine TabletGlaxoSmithKline Pharmaceuticals Ltd₹25.70
5Calpol 650 TabletGlaxoSmithKline Pharmaceuticals Ltd₹30.50
Ranked by how often readers opened a partner link in the last 30 days.
All medicines →